LAN settings

Wi-Fi setting list

The network settings information of the printer appears when it is connected by Wi-Fi. (Some setting items are not displayed depending on the printer settings.)

("XX" represents alphanumeric characters.)

Enable/disable Wi-Fi

Enables/disables Wi-Fi.

Wi-Fi setup

Selects the setup method for Wi-Fi connection.

• Easy wireless connect

  Select if you specify the settings of the access point information to the printer directly from a device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen instructions of the connecting device for the setup procedure.

• Manual connect

  Select when you perform settings for Wi-Fi manually using the operation panel of the printer.

• WPS (Push button method)

  Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi Protected Setup (WPS) push button method. Follow the on-screen instructions during setup.

• Other connection types

  • WPS (PIN code method)

    Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.

Advanced

For details on each setting item:

• Advanced setup

Wireless Direct setting list

The network settings information of the printer appears when it is connected by the wireless direct. (Some setting items are not displayed depending on the printer settings.)

("XX" represents alphanumeric characters.)

Connect to smartphone

Enables to connect the smartphone to the printer by reading the QR code displayed on the touch screen with the smartphone, or also by manually obtaining the network name and password.

Enable/disable Wireless Direct

Enables/disables Wireless Direct.

Change network name (SSID)

Changes the identifier (SSID/the printer's name displayed on a Wi-Fi Direct compatible device) for Wireless Direct.

Change password

Changes the password for Wireless Direct.

Connection request confirmation

Selecting ON displays the confirmation screen when a Wi-Fi Direct compatible device is connecting the printer.

2.4GHz/5GHz Switch

Select a frequency.

Advanced

For details on each setting item:

• Advanced setup

Wired LAN setting list

The network settings information of the printer appears when it is connected by wired LAN. (Some setting items are not displayed depending on the printer settings.)

("XX" represents alphanumeric characters.)

Enable/disable Wired LAN

Enables/disables wired LAN.

Advanced

For details on each setting item:

• Advanced setup

Set printer name

Specifies the printer name. You can use up to 15 characters for the name.

Note

• You cannot use the same printer name as that already used for other LAN connected devices.

• You cannot use a hyphen for the initial or last character of the printer name.

TCP/IP settings

Performs IPv4 or IPv6 setting.

WSD settings

Setting items when you use WSD (one of the network protocols supported in Windows).

• Enable/disable WSD

  Selects whether WSD is enabled or disabled.

  Note

  • When this setting is enabled, the printer icon is displayed on the Network Explorer in Windows.

• Optimize inbound WSD

  Selecting Enable allows you to receive the WSD printing data faster.

• WSD scan from this printer

  Selecting Enable allows you to transfer the scanned data to the computer using WSD. To transfer the scanned data, press Color button.

  Note

  • When you forward the scanned data to the computer searched using WSD, you cannot select the document type.

• Timeout settings

  Specifies the timeout length.

Bonjour settings

Setting items when you use Bonjour.

• Enable/disable Bonjour

  Selecting Enable allows you to use Bonjour to perform the network settings.

• Service name

  Specifies the Bonjour service name. You can use up to 48 characters for the name.

  Note

  • You cannot use the same service name as that already used for other LAN connected devices.

LPR protocol settings

Enables/disables the LPR setting.

RAW protocol

Enables/disables RAW printing.

LLMNR

Enables/disables LLMNR (Link-Local Multicast Name Resolution). Selecting Enable allows the printer to detect printer's IP address from the printer name without a DNS server.

IPP settings

Selecting Enable allows you to print via the network with the IPP protocol.

Wi-Fi DRX settings

Selecting Enable allows you to activate discontinuous reception when using Wi-Fi (discontinuous reception).

Note

• Depending on the Wi-Fi router used, discontinuous reception may not be activated even though Enable is selected.

• Discontinuous reception is enabled only while the printer is on standby. (The touch screen is in the screen saver mode.)

Wired LAN DRX settings

Selecting Enable allows you to activate discontinuous reception when the printer is connected to a device compatible with wired LAN. The discontinuous reception can reduce power consumption.

IPsec settings

Selecting Enable allows you to specify the IPsec security.

IEEE802.1X/EAP settings

Setting item when you use IEEE802.1X/EAP (WPA/WPA2 Enterprise).

• Enable/disable

  Enables/disables IEEE802.1X/EAP.

• Search for EAP router

  Searches switch/access point of IEEE802.1X/EAP and display it.

• Last authentication result

  Displays the latest authentication result of IEEE802.1X/EAP setting.

Easy wireless connect

When set to Auto start: ON, the device will automatically put into the standby mode for easy wireless connect.

To prevent the device from putting into the standby mode for easy wireless connect at unintended times, set to Auto start: OFF.